John Deere AC-2500E - Manual (Page 8)

8 Operator’s Manual
ClEANINg dETERgENT PRECAuTIONS
DO NOT use solvents or highly corrosive detergents or acid type cleaners
with this pressure washer. Use only mild detergents.
KNOW YOUR DETERGENTS! Be prepared to tell a physician exactly
what you are using in the event of an emergency. Read the Material
Safety Data Sheet (MSDS) provided with your detergent and all detergent
labels. Follow all appropriate instructions regarding preparation use,
safety and transportation. Keep ALL detergents out of the reach of
children.
DO NOT use this pressure washer to dispense hazardous detergents.
DO NOT alter the detergent injection feature in any manner not prescribed
in this manual. Use only genuine John Deere replacement parts for
necessary repairs.
HANdlE CHEmICAl PROduCTS SAfEly
Direct exposure to hazardous chemicals can cause injury. Potentially
hazardous chemicals used with the pressure washer includes such items
as detergents.
A Material Safety Data Sheet (MSDS) provides specific details on detergents;
physical and health hazards, safety procedures and emergency response
techniques.
Check the MSDS before you start any job using a detergent. That way
you will know exactly what the risks are and how to do the job safely. Then
follow procedures and recommended equipment. (See your John Deere
dealer for MSDS Sheets on products used with this equipment.)
MSDS
AdjuSTmENT PRECAuTIONS
NEVER alter or modify the equipment, be sure any accessory items and
system components being used will withstand the pressure developed.
Use ONLY genuine Mi-T-M parts for repair of your pressure washer.
Failure to do so can cause hazardous operating conditions and will void
warranty.
NEVER make adjustments to the machinery while it is connected to the
power source.
Know how to stop the pressure washer and bleed pressures quickly. Be
thoroughly familiar with controls.
Before servicing the unit; turn the unit off, disconnect from the power
source, relieve the water pressure, and allow the unit to cool down.
Service in a clean, dry, flat area.
Follow the maintenance instructions specified in this manual.