JVC GR-DLS1 - Manual (Page 42)

42
EN
RECORDING Advanced Features (Cont.)
•The P.AE/Effect Menu disappears and the
selected mode is activated. The symbol of the
selected mode appears.
5 START RECORDING
Press START/STOP. The image begins with the
selected effect.
6 DISABLE P.AE/EFFECT
To turn off the selected effect, re-access the
P.AE/Effect Menu and move the pointer and
highlight bar to “OFF” by rotating the Select
Dial. Then press it.
NOTE:
P.AE/Effects can be changed during recording or
during Record-Standby.
P.AE/Effects
IMPORTANT:
● When the Digital Image Stabilizer is activated, the P. AE/Effects other than "SHUTTER" are not available.
● If certain Fades or Wipes (
੬
pg. 36 – 41) are activated or if the Progressive Dial is set to "VIDEO", some
P.AE/Effects cannot be used. If you select a P.AE/Effect that is unusable in the current situation, the
effect’s symbol begins flashing.
You can choose any one of the effects from the P.AE/Effect Menu.
A
M
5S
OFF
PLAY
FOCUS
EXPOSURE
AUTO
OFF
OFF
AUTO
AUTO
W. BALANCE
FADER
/ WIPE
P. AE
/ EFFECT
RETURN
4
P. AE / EFFECT
SHUTTER
SHUTTER
SLOW SHUTTER
VIDEO ECHO
OFF
SHUTTER 1/250
1/50
1/100
1/250
1/50
1/100
SHUTTER 1/500 1/500
SEL. 4
PAUSE 1/50
Display
Manual Mode Item Menu The indicator for the selected
mode appears, and the selected
mode is engaged. P.AE/EFFECT Menu
1 SELECT OPERATION MODE
First turn the Power Dial to “ M ” while pressing
down the lock button located on the dial,
make sure the LCD monitor is open fully or the
viewfinder is pulled out.
2 ACCESS MANUAL MODE ITEM
MENU
Press the Select Dial and move the pointer and
highlight bar to "P.AE/EFFECT" by rotating the
Select Dial.
3 ACCESS P.AE/EFFECT SELECT MENU
Press the Select Dial. The P.AE/Effect Menu
appears.
4 SELECT EFFECT
Move the pointer and highlight bar to the
desired effect by rotating the Select Dial, then
press it.
Lock button
Power Dial
Select Dial