JVC GR-DLS1 - Manual (Page 57)

EN
57
3
1 CONFIRM POWER-OFF STATUS
Make sure the camcorder’s power is off.
2 CONNECT CAMCORDER TO TV OR VCR
Pull out the connector cover and open it.
Connect as shown in the illustration
1 , 2 or 3
(
੬
pg. 56, 57).
If Using A VCR . . . go to step 3.
If not . . . go to step 4.
3 CONNECT VCR OUTPUT TO TV INPUT
Refer to your VCR’s instruction manual.
4 TURN ON POWER
Turn the Power Dial to “PLAY” while pressing
down the lock button located on the dial and
turn on the TV/VCR.
5 SELECT TV’S VIDEO MODE
Set the TV to the channel or mode appropriate
for video playback.
To choose whether or not the following displays
appear on the connected TV . . .
•Date/Time, Time Code
.... Set to “ON” or “OFF” in the Playback Menu
(
੬
pg. 54).
•Playback Sound Mode Display
.... Set the Power Dial to “ M ”, press the MENU
button, and set “ON SCREEN” in the Date/
Time Menu (
੬
pg. 11) to “ON” or “OFF”.
Then set the Power Dial back to “PLAY”.
Connection to a TV or VCR equipped with an
S-VIDEO IN and/or A/V input (RCA type)
connectors
AC Power
Adapter/Charger
VCR
NOTES:
● Never connect any other VIDEO/AUDIO cable
than the provided VIDEO/AUDIO cable to the
camcorder’s AV OUT connector.
● When using the provided DC cord, S-VIDEO
cable or editing cable, make sure you connect the
end of the cable with the core filter to the
camcorder. The core filter improves performance
of equipment.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
● To keep the camcorder's display from appearing
on the TV screen during playback, press the ON/
OFF button for longer than 1 second.
● Set the VIDEO OUT select switch of the cable
adapter as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-VIDEO cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.
● While the VIDEO/AUDIO cable is connected to
the AV OUT jack, sound cannot be heard from
the speaker.
To DC OUT jack DC cord
Core
filter
Core filter
Connect when the
S-VIDEO cable is not used
S-VIDEO cable
(provided) To S-VIDEO
OUT connector
To AV OUT connector
To DC IN jack
To
TV or VCR
VIDEO/AUDIO
cable (provided)
To S-VIDEO IN
connector
To VIDEO IN connector
To AUDIO IN
connector (L/R)
Core filter
Connector
is under the
cover.
White to AUDIO L
Red to AUDIO R
Yellow to VIDEO