JVC 0703-AH-PJ-BJ - Manual (Page 11)

June 30, 2003 6:18 pm Page 11
— 11 —
Master Page: Right
G- CODE
TM /S HOW V IEW
TM Timer Programming
With the G- CODE system , timer programming is greatly simplified
because each TV programme has a corresponding code number
which your recorder is able to recognise.
A
Access G-CODE/SHOWVIEW NO.
screen
Press PROG.
B
Enter G- CODE number
Press the number keys to enter the
G-
CODE number of a programme you
wish to record.
● If you make a mistake, press & and
input the correct number.
C
Enter G- CODE programme screen
Press OK, and the G- CODE Programme
screen appears. (If you're just starting
out, “P1” appears.)
● If the number you entered is invalid, “ERROR” appears on the
screen. Press & and input a valid G- CODE number.
● If the “G-CODE/SHOWVIEW SETUP” screen appears, see
“ATTENTION – Regarding Guide Program Number Set”
on page 11.
D
Set tape speed
Press p to set the tape speed.
E
Access title edit screen
Press the number keys “1”. The Title Edit
screen appears.
● You can access the Title Edit screen
only when “PROG. NAVIGATION” is
set to “ON”. (
੬
16)
F
Enter programme title
Press the number keys and PUSH JOG e
to enter characters, then press OK. For
details, refer to “Entering Character” on
page 15.
G
Return to normal screen
Press PROG or OK. “PROGRAM
COMPLETED” appears on the screen for about 5 seconds, then
normal screen appears. If “PROGRAM OVERLAPPED” appears on
the screen and “Err” on the display panel, see page 13.
● Repeat steps 1 – 7 for each additional programme.
H
Engage recorder’s timer mode
Press #. The recorder turns off automatically and “#” appears on
the display panel.
● To disengage the timer, press # again.
Express Timer Programming
A
Access G- CODE screen
Press PROG.
B
Access programme screen
Press START +/–. (If you’re just starting
out, “P1” appears.)
C
Enter programme start time
Press START +/– to enter the time you
want recording to start.
● Press and hold START +/– to move in
30-minute increments, or press and
release repeatedly to move 1 minute at
a time.
D
Enter programme stop time
Press STOP+/– to enter the time you want recording to stop.
● Press and hold STOP+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter programme date
Press DATE+/–. (The current date appears on screen. The date you
enter appears in its place.)
Before performing G- CODE /S HOW V IEW Timer Programming:
● Be sure to read “G-
CODE TM /S HOW V IEW TM System Setup”
(
੬
10).
● Insert a cassette with the safety tab in place. The recorder will
come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
● Select the appropriate colour system ( ੬
16).
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, see “G-
CODE TM /S HOW V IEW TM System Setup” on
page 10 and set the Guide Program number for that G- CODE
number correctly.
G-CODE/SHOWVIEW NO.
[PROG] : EXIT
[+/–] : EXPRESS PROGRAMING
[0-9]
G-CODE/SHOWVIEW NO.
[PROG] : EXIT
[0-9]
1 2 3 4 5 6 7 8
[&] : DELETE
– PI –
[1] : TITLE : OK
NO. 123456789
START STOP
21:00 22:00
SP
DATE TV PROG
25.04 1
– P1 –
[PROG] : EXIT
[Y/U] : CURSOR
[&] : DELETE
[0-9] : SELECT LETTERS
: OK
25.04 21:00 PR.1
– P1 –
[PROG] : EXIT
[Y/U] : CURSOR
[&] : DELETE
[0-9] : SELECT LETTERS
: OK
25.04 W
Satellite Tuner Users
To timer-record a satellite broadcast using the G-
CODE system:
A Perform steps 1 – 8.
B Set the satellite tuner to the appropriate channel before the
selected programme begins.
C Leave the satellite tuner's power on.
ATTENTION
Regarding Guide Program Number Set
“G-CODE/SHOWVIEW SETUP” appears after performing step 3
if the Guide Program number for the G-
CODE number you
entered has not been set.
● Press the number keys or PUSH
JOG rt to input the channel
position number on which your
recorder receives that station, then
press OK or PUSH JOG e.
The G-
CODE program screen
appears.
(Ex.) To timer-record a RTR
programme with the G-
CODE system.
* If your recorder receives RTR on the channel position 2, press OK or
PUSH JOG e after entering “2”.
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder will
come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
● Select the appropriate colour system ( ੬
16).
GUIDE PROG TV PROG
2 – –
G-CODE/SHOWVIEW SETUP
[MENU] : EXIT
[0-9] OR [R/T]: SELECT
[1] : TITLE
[1] : TITLE
21:00
HR-S6960AA_EN.fm Page 11 Monday, June 30, 2003 6:18 PM