Editing, Editing from a camcorder, Edit to or from another video recorder editing – JVC 0703-AH-PJ-BJ User Manual

Page 20

Advertising
background image

June 30, 2003 6:18 pm

Page 20

— 20 —

Master Page: Right

Editing from a camcorder

All necessary cables can be obtained from your dealer.

You can also use another video recorder as the player instead of

a camcorder.

When you select “EDIT” to dub tapes, be sure to select “AUTO”

(or “NORM” when the B.E.S.T. function is set to “OFF”) after
you finish dubbing the tapes.

You can use a camcorder as the source player and your video
recorder as the recorder.

A

Make connections

aIf the camcorder has no S-VIDEO output connector...

... connect the camcorder's AUDIO/VIDEO OUT connectors to
the recorder's front panel AUDIO/VIDEO input connectors.

bIf the camcorder has an S-VIDEO output connector...

... connect the camcorder's S-VIDEO OUT and AUDIO OUT
connectors to the recorder's front panel S-VIDEO(S-2) and
AUDIO input connectors. The recorder's rear panel S-VIDEO IN
and AUDIO IN input connectors are also available.

● When using a monaural camcorder, connect its AUDIO OUT

connector to the AUDIO L input connector on your recorder.

● When a Master Edit Control-equipped JVC camcorder is used,

the camcorder is capable of controlling the recorder. Refer to
the camcorder's instruction manual for operating procedure.

B

Set recorder’s input mode

Press number key “0” and/or PR +/– to select “F-1” for the
AUDIO/VIDEO input connectors, or “S-2” for the AUDIO/S-
VIDEO input connectors, depending on the connectors being
used.

C

Select “EDIT” for picture control set mode

Follow the “Picture Control” section on page 15, then select
“EDIT.”

D

Start camcorder

Engage its Play mode.

E

Start recorder

Engage its Record mode.

Edit to or from Another Video Recorder

Editing

IMPORTANT

● To edit, both the player and the recorder must be of the same

colour system. Select the appropriate colour system (

16).

● PAL, SECAM and NTSC camcorders can be used as a player

for editing.

a If the camcorder has no S-VIDEO output connector...

b If the camcorder has an S-VIDEO output connector...

Audio/Video Cable
(not provided)

AUDIO
input

VIDEO input

AUDIO OUT

VIDEO OUT

Player

Camcorder

Recorder

Audio Cable (not provided)

AUDIO
input

S-VIDEO (S-2)
input

AUDIO OUT

S-VIDEO OUT

Player

Camcorder

Recorder

S-Video Cable (provided)

(MONO)

(MONO)

TV Receiver

Your recorder

Recorder

Player

Another recorder

AV Cable
(not provided)

RF Cable
(provided)

VIDEO
CHANNEL

TV Receiver

Your recorder

Recorder

Player

Another recorder

AV Cable
(not provided)

RF Cable (provided)

VIDEO CHANNEL

HR-S6960AA_EN.fm Page 20 Monday, June 30, 2003 6:18 PM

Advertising