JVC GET0661-001A - Manual (Page 14)

14 ENGLISH
Refer also to the instructions supplied with the Bluetooth device.
Preparation:
• Connect the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of the
unit.
• Operate the device to turn on its Bluetooth function.
~
] Turn on the power.
Ÿ
– – – – – – – – or – – – – – – – –
Only one USB Bluetooth Adapter can be detected at a time.
USB input terminal KS-UBT1
USB cable from the
rear of the unit
Pairing a device
When you connect a Bluetooth device to the unit for the first time, make pairing between the unit
and the device.
• Once the connection is established, it is registered in the unit even if you reset the unit. Up to five
devices can be registered in total.
• Only one device for Bluetooth phone and one for Bluetooth audio can be connected at a time.
EN12-21_KW-XR810[J]2.indd 14 EN12-21_KW-XR810[J]2.indd 14 1/20/10 3:08:20 PM 1/20/10 3:08:20 PM