JVC GET0661-001A - Manual (Page 33)

33 ENGLISH
Category Menu item Selectable setting, [ Initial: Underlined ]
Audio
HPF
High Pass
Filter Select the cutoff frequency to the front/rear speakers. Set this to
match the LPF settings.
• 62Hz/95Hz/
135Hz
• Off
: Frequencies lower than 62 Hz/95 Hz/135 Hz are cut
off.
: All signals are sent to the front/rear speakers.
Beep
Keytouch tone • On
• Off : Activates the keypress tone.
: Deactivates the keypress tone.
Amplifier
Gain *
6
• High Power
• Low Power : Vol 00 – Vol 50
: Vol 00 – Vol 30 (Select if the maximum power of
each speaker is less than 50 W to prevent damaging
the speakers.)
Display
Dimmer • Auto
• On
• Time Set
• Off
: Dims the display when you turn on the
headlights. * 7
: Dims the display and button illumination.
: Set the timer for dimmer. (
38)
: Cancels.
Level Meter • Meter 1
• Meter 2 : Selects the different level meter patterns. ( 6)
• Press DISP to show the selected level meter.
Scroll * 8, * 9 • Once
• Auto
• Off : Scrolls the displayed information once.
: Repeats scrolling (at 5-second intervals).
: Cancels.
Pressing DISP for more than one second can scroll the display
regardless of the setting.
Tag Display • On
• Off
: Shows the Tag information while playing MP3/
WMA/WAV tracks.
: Cancels.
LCD Type • Negative
• Positive
• Auto : Negative pattern of the display.
: Positive pattern of the display.
: Positive pattern will be selected during the day
time * 10 , while negative pattern will be used during
the night time * 10 .
* 6 The volume level automatically changes to “Vol 30” if you change to <Low Power> with the volume
level set higher than “Vol 30.”
* 7 The illumination control lead connection is required. (See “Installation/Connection Manual.”)
* 8 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* 9 Not applicable to HD Radio text scrolling.
* 10 Depends on the <Dimmer> setting.
EN30-39_KW-XR810[J]2.indd 33 EN30-39_KW-XR810[J]2.indd 33 1/20/10 3:14:28 PM 1/20/10 3:14:28 PM