Changing the bluetooth settings – JVC GET0661-001A User Manual
Page 20
20
ENGLISH
1
2
] <Bluetooth> ] <Setting>
3
] Select a setting item, then repeat
the procedure to change the setting
accordingly.
• To return to the previous menu, press BACK.
• To exit from the menu, press DISP or MENU.
Setting item
Selectable setting, [
Initial: Underlined
]
Auto Connect
• Last
• Off
: The connection is established automatically with the last
connected Bluetooth device when you turn on the unit.
: The unit does not connect the Bluetooth device automatically.
Connect the device manually. (
16)
Auto Answer
• On
• Off
: The unit answers the incoming calls automatically.
: The unit does not answer the calls automatically. Answer the
calls manually. (
18)
Message
Notice
• On
• Off
: The unit informs you of the arrival of a message by ringing and
displaying “Received Message.”
: The unit does not inform you of the arrival of a message.
MIC Setting
—
: Adjust the volume of the microphone connected to the unit.
[ Level 01/02/03 ]
NR/EC Mode
• On
• Off
: The unit adjusts the Noise Reduction and Echo Cancelation of
the microphone connected to the unit for clearer sound.
: Cancels.
Ringing Tone
• In Unit
• In Phone
: The unit rings to alert you when a call/Text Message comes in.
Call:
Select your preferred ring tone when a call comes
in. [ Tone 1/2/3 ]
Message: Select your preferred ring tone when a Text
Message comes in. [ Tone 1/2/3 ]
: The unit rings (using the connected phones’ ring tone) to
alert you when a call/Text Message comes in. (The connected
mobile phone rings if it does not support this feature.)
Changing the Bluetooth settings
[Hold]
EN12-21_KW-XR810[J]1.indd 20
EN12-21_KW-XR810[J]1.indd 20
1/14/10 12:51:59 PM
1/14/10 12:51:59 PM