JL Audio Stealthbox SB-F-TRKCTR2/10W3v3 - Manual (Page 3)

Sheet SKU#011113 Revision 9/4/01
P.O. Box 839004, Miramar, Florida 33083-9004 Voice: (954) 981-9497 Fax: (954) 987-7855
SB-F-TRKCTR/10W3, JL AUDIO, Inc 1999 • Page 3
This completes the installation.
Specifications:
Enclosure Type: Acoustic Suspension (Sealed)
Driver Type: JL AUDIO 10W3-D6 Subwoofer
Cont. Power Handling: 250 Watts
Nominal Impedance: 3
Ω
STEP 7: Run speaker wire to the mounting location of the
Stealthbox. Trim to length and attach to the Stealthbox.
STEP 8: Test the operation of the enclosure.
STEP 9: Place the Stealthbox in the vehicle. The brackets on the
bottom of the Stealthbox should fit over the studs in the floor of the
vehicle.
STEP 10: Using the nuts removed in Step 2, bolt the Stealthbox
into place. This step will require an open end wrench. Tighten
securely.