Pg. 57, 59, Pg. 57, 59), Set the following recording options as required – JVC LPT0827-001B User Manual

Page 57: Access the confirmation screen, Complete timer programming, Engage the unit’s timer mode

Advertising
background image

Masterpage:Right-No-Heading

Filename [DR-M1EK_08Recording.fm]

Page 57

August 15, 2003 7:53 pm

57

E

Set the following recording options as
required.

A Press w e to select the desired option.

B Press rt to select the desired setting, then press

ENTER.

“REC MODE” (

pg. 54, “Recording Speed”) (

pg. 55,

“Free Rate Function”), “VPS/PDC” (

pg. 59, “PDC

Recording”), “DAILY/WEEKLY” (

pg. 57, “Daily/Weekly

Rec Function”), “NAME” (

pg. 70, “Modify Programme

Name”), and “STOP” (To advance/go back the stop time
by 30 minutes, press and hold rt).

● VPS (Video Programme System) recording is not currently

available in the U.K. and not possible with this unit.

F

Access the confirmation screen.

Press ENTER.

G

Complete timer programming.

Press ENTER.

● To programme another timer, repeat steps B G.

● If “PROGRAM OVERLAPPED” appears on the TV screen, see

“When programmes overlap each other” (

pg. 64).

H

Engage the unit’s timer mode.

Press # (TIMER). The unit turns off automatically and
“#” appears on the front display panel.

● To disengage the timer mode, press # (TIMER) again.

NOTES:

● There may be cases that VIDEO Plus+ programming timer

recording function prolongs the stop time of the programming.

● When two successive programmes are recorded on a

DVD-RW disc with VIDEO Plus+ programming timer
recording function, the beginning of the second one may be
left off the recording.

● VIDEO Plus+ Timer Programming is not possible on the discs

used exclusively for On-Disc Timer Programming.

● If the copy limited programme is received during

timer-recording, the unit enters Record Pause mode.
Recording starts again if it is switched to a recordable
broadcast during the time you programmed.

Daily/Weekly Rec Function

You can record programmes with one of the following weekly/
daily timer settings.

Satellite Receiver Users

To timer-record a satellite broadcast using the VIDEO Plus+
system:

A Perform “Satellite Receiver Control Setting” on page 28.

B Perform “VIDEO Plus+

®

Timer Programming”. In step

E,

you cannot set “VPS/PDC” to “ON”.

C Leave the satellite receiver’s power on.

WEEKLY

Select to record a weekly programme.

MON–FRI

Select to record a daily programme from
Monday through Friday.

MON–SAT

Select to record a daily programme from
Monday through Saturday.

SUN–SAT

Select to record a daily programme from
Sunday through Saturday.

DR-M1EK_01.book Page 57 Friday, August 15, 2003 7:53 PM

Advertising
This manual is related to the following products: