Slow-motion playback, Frame-by-frame playback, Playback zoom – JVC GR-DVL105 User Manual

Page 41

Advertising
background image

EN

41

SHIFT

PAUSE

PLAY

STOP

Press T

Normal playback

Left or SLOW

Rewind Button

To move image,
press

(Right)

while keeping
SHIFT held down.

Zoom Buttons

Remote sensor

Right or SLOW

Forward Button

Up Button

Down
Button

FEATURE:

Slow-Motion Playback

PURPOSE:

To allow slow-speed search in either direction during
playback.

OPERATION:

1) To change from normal to Slow-Motion Playback,

press PAUSE (6) to engage Still Playback then press
SLOW (9 or 0) more than approx. 2 seconds. After
approx. 1 minute in Slow Rewind or approx. 2
minutes in Slow Forward, normal playback resumes.

Ⅲ To stop Slow-Motion Playback, press PLAY (4).
NOTES:

● During Slow-Motion Playback, due to digital image

processing, the picture may take on a mosaic effect.

● After SLOW (9 or 0) is pressed and held, the still

image may be displayed for a few seconds,
followed by a blue screen for a few seconds. This is
not a malfunction.

● There may be a small margin between the slow-

motion playback start point you chose and the
actual start point for Slow-Motion Playback.

● During Slow-Motion Playback, there will be

disturbances in video and the picture may seem
unstable, especially with steady images. This is not
a malfunction.

● During Slow-Motion Playback, press PAUSE (6) to

pause playback.

FEATURE:

Frame-By-Frame Playback

PURPOSE:

To allow frame-by-frame search during playback.

OPERATION:

1) To change from normal to Frame-By-Frame Playback,

press PAUSE (6) to engage Still Playback then press
SLOW (0) repeatedly for forward or SLOW (9)
repeatedly for reverse. Each time it is pressed, the
frame is played back.

FEATURE:

Playback Zoom

PURPOSE:

To magnify the recorded image up to 10X at any time during playback.

OPERATION:

1) Press PLAY (4) to find the scene of interest.
2) Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the

camcorder’s remote sensor. Pressing T zooms in.

3) You can move the image on screen around to find a particular portion of the picture. While holding

down SHIFT, press

(Left),

(Right),

(Up) and

(Down).

Ⅲ To end zoom, press and hold W until magnification returns to normal. Or, press STOP (5) and then press

PLAY (4).

NOTES:

● Zoom can also be used during slow-motion and still playback.

● Due to digital image processing, the quality of the image may suffer.

Advertising