JVC GY-HM700U - Manual (Page 57)

53
Note :
● During Clip Review, only the [CANCEL] and [REC] buttons
are enabled. Press the [CANCEL] button to cancel clip
review and return to
ASTBYB (recording standby) mode.
Press the [REC] button to cancel clip review and enter
recording mode. It will take some time to start recording after
the button is pressed.
● When the last clip is less than 5 seconds, the whole clip is
played back.
● Only video clips in the currently selected slot can be
reviewed.
● When there are no clips in the selected slot, Clip Review
function is disabled.
● Clip Review is unavailable when Clip Continuous REC is
paused (STBYC , red text) . To operate Clip Review, use the
[CANCEL] button to set to
ASTBYCB (white text) first.
( A Page 55)
● Clip Review is unavailable when the camera recorder is
connected to an external equipment and the equipment is in
recording state.
You can assign functions to the [USER1], [USER2], and
[USER3] buttons.
By assigning functions to the [USER1], [USER2], and
[USER3] buttons, the usability of the camera recorder is
enhanced.
1
Assign functions to the [USER1], [USER2], and
[USER3] buttons from the menu. ( A Page 74)
Set each of the [USER1], [USER2], and [USER3] items in
the [Main Menu]
B[Camera Function]B[Switch Set...] menu.
Memo :
● Operations of the [USER1], [USER2], and [USER3]
buttons are interlocked with the menu settings.
● When the menu screen is displayed, these buttons
function as the menu operation buttons. ( A Page 66
[Basic Operations in Menu Screen])
Assigning Functions to
User Buttons
[USER1], [USER2], [USER3]
Buttons