JVC 0405TKH-CR-MU - Manual (Page 38)

38
AV-32/28EX5BK / LCT1821-001A-U / ENGLISH
PICTURE FEATURES
Refer to “Setting the TV” (see page 36) for
details of displaying the menu.
• COLOUR SYSTEM cannot be chosen
when watching Digital terrestrial
broadcasting (DVB-T).
DIGITAL VNR
The DIGITAL VNR function cuts down the
amount of noise in the original picture.
You can choose from the three DIGITAL
VNR function settings of AUTO, MIN and
MAX.
The TV and external input may be given
different DIGITAL VNR settings.
AUTO:
The TV will automatically adjust the level of
the DIGITAL VNR effect to match the
amount of noise in the picture, giving you the
best possible picture.
• If you set the DIGITAL VNR effect too
high it can make the picture less sharp. It
is recommended to use the AUTO setting
if you can.
MIN:
The level of the DIGITAL VNR effect is set
to the minimum. If you set the DIGITAL
VNR function to AUTO but feel that the
sharpness of the original picture has not been
reproduced fully, change the setting from
AUTO to MIN.
• The MIN setting is not suitable for low-
quality pictures which contain a lot of
noise.
MAX:
The level of the DIGITAL VNR effect is set
to the maximum. If you set the DIGITAL
VNR function to AUTO but still notice some
noise, change the setting from AUTO to
MAX.
• The MAX setting is not suitable for high-
quality pictures which contain very little
noise.
OFF:
The DIGITAL VNR function is turned off.
DigiPure Pro
The DigiPure Pro function uses the latest in
digital technology to give you a natural-
looking picture.
DigiPure function:
This function helps to create a natural-
looking picture by eliminating unnecessary
edges from high-contrast and crisp images.
For images with low-contrast, edges are
added to produce a sharper, more detailed
picture.
You can choose from the three DigiPure
function settings of AUTO, MIN and MAX.
The TV and external input may be given
different DigiPure settings.
• If you set the DigiPure effect too high on
a low-quality picture that contains a lot of
noise, this may actually make the noise
worse. We recommend you use the
AUTO setting if you can.
Picture motion compensation
function:
This function displays fast-moving pictures
more smoothly and naturally on the screen.
• The effect level of the picture motion
compensation function cannot be
changed. The effect level is the same no
matter which of the AUTO, MIN or MAX
settings is used.
1 Choose DigiPure Pro
2 Press the 5 buttons to choose a
setting. Then press the a button
AUTO:
The TV will automatically adjust the level of
the DigiPure effect to match the amount of
noise in the picture, giving the best possible
picture.
MIN:
The level of DigiPure effect is set to the
minimum. When you set the DigiPure Pro
function to AUTO and notice some noise,
change the setting from AUTO to MIN.
• The MIN setting is not suitable for high-
quality pictures which contain very little
noise.
D1015-EN
DIGITAL VNR
DigiPure Pro
COLOUR SYSTEM
MOVIE THEATRE
4:3 AUTO ASPECT
PICTIRE TILT
AUTO
AUTO
AUTO
PICTURE FEATURES
OK
AV-32&28EX5BK_Eng.book Page 38 Wednesday, April 13, 2005 5:51 PM