Setting up your tv, Connecting the aerial – JVC 0405TKH-CR-MU User Manual
Page 6
6
AV-32/28EX5BK / LCT1821-001A-U / ENGLISH
Setting up your TV
Connecting the aerial
• The connecting cables are not provided.
• For further details, refer to the manuals provided with the devices to be connected.
Caution
• Turn off all the equipment including the TV before connecting anything.
If you connect via a device with an
antenna terminal such as a VCR,
follow A
→ B → C in the diagram
opposite.
If you connect the antenna
directly to the TV, follow 1.
• To connect more equipment, please see
“Connecting the external devices” on
• To connect additional audio equipment,
see “Connecting Speakers/Amplifier” on
• When receiving Digital terrestrial
broadcasting (DVB-T), reception can
suddenly be lost if the signal becomes
weak. Use a correctly installed high-
performance antenna.
• When connecting via a device with an
antenna terminal such as a VCR, depending
on the connection method, the signal may
be weakened. If this happens, use a booster
to increase the signal strength.
• In areas with a lot of radio communication
such as near ports or airports, noise may
be introduced into the picture or sound. In
such cases, reception may be improved by
using a high-performance antenna.
• Read the instruction manual of the
devices which you connect to the TV.
R
AUDIO OUT
L
SERVICE
EXT-
1
EXT-
2
SERVICE
21-pin
SCART
Cable
Back of the TV
75-ohm
Coaxial
Cable
AV IN/OUT
Terminal
To Aerial
Output
To Aerial
Input
VCR
Aerial
75-ohm
Coaxial
Cable
CAM (CI) slot
Not available
(For service
adjustments)
Body_Eng.fm Page 6 Thursday, April 14, 2005 4:14 PM