JVC 0405TKH-CR-MU - Manual (Page 54)

54
Additional preparation
AV-32/28EX5BK / LCT1821-001A-U / ENGLISH
„ Equipment which can output the
S-VIDEO signal (Y/C signal)
Connect the equipment to an EXT terminal
(but not the EXT-1 terminal).
You can choose between an S-VIDEO signal
(Y/C signal) and a regular video signal
(composite signal). For details of how to
operate the equipment, see “S-IN (S-VIDEO
input)” on page 43.
„ T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible
VCR to the EXT-2 terminal. If not, the T-V
LINK function will not work properly.
• When connecting a T-V LINK compatible
VCR to the EXT-2 terminal, be sure to
connect the decoder to the VCR. If not,
the T-V LINK function may not work
properly.
• When you connect the decoder to the
VCR, after you have stored TV channels
in the programme numbers (PR) list, set
the DECODER (EXT-2) function for the
programme number (PR) to ON to
unscramble a scrambled TV channel. For
details, see “DECODER (EXT-2)” on
page 47.
„ Connecting headphones
Connect the headphones with a stereo mini-
jack (3.5 mm diameter) to the headphone
jack socket.
• No sound comes from the TV speakers
when the headphones are connected and
only one screen is displayed.
„ Video or sound signal output from
the EXT-2 terminal
You can change over the output of the video/
sound signal from the EXT-2 terminal. This
is useful when you want to dub the video/
sound from another device onto the VCR
connected to the EXT-2 terminal. For details
on how to do this, see “DUBBING” on
page 44.
„ TV output from the EXT-1 terminal
The video/sound signal of a Analogue
terrestrial broadcasting channel you are
viewing is always output from the EXT-1
terminal.
• Changing over a programme number (PR)
also changes over the TV output from the
EXT-1 terminal.
• The video/sound signal from an EXT
terminal cannot be output.
• Teletext programmes cannot be output.
„ Connection when recording to
VCR
• When recording an Analogue terrestrial
broadcasting, connect to either terminal
EXT-1 or EXT-2. If you connect to the
EXT-2 terminal, make sure the
“DUBBING” setting (see page 44) is set
to “TV”.
• Choose the EXT-2 terminal to connect to
a T-V LINK compatible VCR.
When recording an Analogue terrestrial
broadcasting, set the “DUBBING” setting
(see page 44) to “TV”.
When recording a Digital terrestrial
broadcasting (DVB-T), set the
“DUBBING” setting (see page 44) to
“DTV”.
AV-32&28EX5BK_Eng.book Page 54 Wednesday, April 13, 2005 5:51 PM