JVC GR-DVJ70 - Manual (Page 44)

44
EN
VCR/TV Connection
1 CONNECT CAMCORDER TO TV OR
VCR
Connect as shown in the illustration. If your
TV/VCR has the SCART connector, use the
provided cable adapter.
2 ATTACH CAM STAND TO
CAMCORDER
Line up A with a , B with b and C with c .
The CAM Stand has two sides. One side is
used to hold the camcorder upright and the
other side is used to hold the camcorder flat.
3 TURN ON POWER
Turn on the power to the camcorder and the
TV/VCR.
4 SELECT TV’S VIDEO MODE
Set the TV to the channel or mode appropriate
for video playback.
If Using A VCR . . . go to step 5.
If not . . . go to step 6.
5 CONNECT VCR OUTPUT TO TV
INPUT
Refer to your VCR’s instruction manual.
6 START PLAYBACK
Slide the cover (
੬
pg. 45) and press PLAY.
You can watch the scenes you recorded on the
TV.
7 END PLAYBACK
Press STOP and, if you’re not going to
continue using the camcorder, set the Power
pDial to “OFF”.
NOTES:
To choose whether or not the following displays
appear on the connected TV . . .
● Date/Time, Time Code
..... set to “ON” or “OFF” in the Playback Menu
(
੬
pg. 49).
● Playback Sound Mode Display
..... set the Power Dial to “REC”, and set “ON
SCREEN” in the Date/Time Menu (
੬
pg. 12)
to “ON” or “OFF”. Then set the Power Dial
back to “PLAY”.
● Set the VIDEO OUT select switch of connector as
required: either to “CVBS” (with the direct VCR
connection) or to “YC” (with the RGB converter
connection).
PLAYBACK Basic Connections (Cont.)
MIC
AV-OUT
DC-IN 6V
A
B
a
b
c
C
CAM STAND
To AV OUT
AUDIO and VIDEO cable
(ø3.5 DV TV or VCR)
To AUDIO and
VIDEO IN
connectors
Cable adapter (provided)
VIDEO OUT select switch (Y/C or CVBS)