JVC HD-58S998 - Manual (Page 20)

20
Quick Setup
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in
their digital form.
TV Side Panel
DTV Decoder
HDMI to DVI Cable
After the connections have been made,
tighten the screw to secure the cables.
L R
AUDIO OUT
DIGITAL OUT
DIGITAL-IN
INPUT-1 INPUT- 2
L
R
AUDIO IN
Connecting to a Digital TV Receiver
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to
the HDMI INPUT-1 on the side of your television.
2) Connect a red cable from the "R AUDIO OUT" on the back of your DTV Device, to the
HDMI AUDIO IN "R" input terminal.
3) Connect a white cable from the "L AUDIO OUT" on the back of your DTV Device, to the
HDMI AUDIO IN "L" input terminal.
• Personal computer compatibility cannot be guaranteed.
• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television
with a DTV decoder.
Notes:
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance
may be slightly shifted. Access the “HDMI SIZE” in the initial setup menu to adjust it. (Refer
to page 48.)
• When you do the above connection, set "VIDEO-1 AUDIO" in the Initial Setup menu to
ANALOG. See "VIDEO-1 AUDIO", page 48.
• The Analog Audio input can only be used with the HDMI INPUT-1.
• When setting the “VIDEO-1 AUDIO – ANALOG / DIGITAL” menu setting on the TV, please
note that this setting only effects the HDMI INPUT-1 jack and that if you use a DVI to HDMI
adapter this connection must be made to the HDMI INPUT-1 along with analog audio cables.
LCT2172-001C-A English.indd 20 LCT2172-001C-A English.indd 20 3/26/07 8:59:14 AM 3/26/07 8:59:14 AM