JVC HD-58S998 - Manual (Page 22)

22
Quick Setup
By connecting your AV Receiver to your television's V3 Smart Input, you can watch picture
sources from many different devices, without having to change or use the other input
connections on your TV. This allows you to free up the other input connections so you can
connect more devices to your television.
Connecting to an AV Receiver using your television's
V3 Smart Input
TV Side Panel
AV Receiver
MONITOR
OUT
MONITOR OUT
Y
P B
P R
S-VIDEO
OVER
Y
P B
P R
VIDEO
L
AUDIO
R
INPUT-3
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-3
on the side of your television.
2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO
INPUT-3 on the side of your television.
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y
VIDEO INPUT-3 on the side of your television.
4) Connect a Blue Component Cable from the AV Receiver's P B MONITOR OUT, into the P B
VIDEO INPUT-3 on the side of your television.
5) Connect a Red Component Cable from the AV Receiver's P R MONITOR OUT, into the P R
VIDEO INPUT-3 on the side of your television.
Notes:
• Please refer to your AV Receiver instruction manual for more information on connecting your
speakers and other devices like a DVD player.
• Use your AV Receiver's remote to switch to the different devices you have connected.
• Some AV Receivers may not respond when the V3 Smart Input function is turned on. See
page 45.
• If you have video connections for each input device connected to your AV Receiver, you
should not connect them using both S-Video and Composite connection at the same time
when you are using V3 Input as the V3 Smart Input. In this case we recommend using the
S-Video connection.
LCT2172-001C-A English.indd 22 LCT2172-001C-A English.indd 22 3/26/07 8:59:14 AM 3/26/07 8:59:14 AM