JVC AV 20420 - Manual (Page 28)

Picture Adjust
28
With Set Video Status, you can save your own set of picture quality adjustments as “Choice”
and have access to them at the touch of a button.
Press the M
ENU
button
π† To SET VIDEO STATUS
è To operate
è To set the TINT levels
π† To move to the next option
Repeat these steps until all levels are set.
π† To SAVE AS CHOICE
è To save settings and exit
• You must use SAVE AS CHOICE to exit the Set Video Status menu, otherwise your
preferences will not be saved.
• You can access your “Choice” settings at any time by pressing the V
IDEO
S
TATUS
button on
the remote control.
Note:
The setting screen will disappear if you do not make any adjustments or move to the next
setting in approximately three seconds. Any changes you have made to picture settings up to
that point will be stored. You can exit the Picture Settings menu at any time by pressing the
E
XIT
button on the remote control.
Set Video Status
���������
���
��
���������� ��������������
������� ���������������������������
������� ���������������������������
��������� ���������������������������
�������� ���������������������������
�������� ���������������������������
��������������
AV-20420,421 English OK 2/11/03, 9:33 AM 28