Juniper Networks Juniper M-series M7i - Manual (Page 7)

Step 3: Install the Router
1. Have one person grasp each side of the router, lift the router, and position it in
the rack. See Figure 4 on page 8.
2. Align the bottom hole in each mounting bracket with a hole in each rack rail,
making sure the chassis is level.
3. Install a mounting screw (provided in the accessory box shipped with the router)
into each hole. Use a Phillips screwdriver to tighten the screws.
4. Install a screw into the second hole in each mounting bracket.
5. Verify that all the mounting screws on one side of the rack are aligned with the
mounting screws on the opposite side and that the router is level.
Step 3: Install the Router ■ 7
Step 3: Install the Router