JVC GD-V422U - Manual (Page 34)

34
SET UP for Input Signals
COLOR SYSTEM / ASPECT AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
Press to select the “COLOR SYSTEM” or
“ASPECT AUTO”.
Press to select each function.
Press (ACTION) button
If the image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
Mode
COLOR SYSTEM
ASPECT AUTO
(4:3)
Function
Set the COLOR SYSTEM to match that of the input signal.
If set to “AUTO”, the COLOR SYSTEM is automatically selected from “PAL”, “SECAM” and
“NTSC”, but not from “M-NTSC”. To view M-NTSC format pictures, you must manually
set to “M-NTSC”.
Set to “NORMAL” to view 4:3 images in an unchanged format when “ASPECT AUTO”
is selected. If you would like to view 4:3 images in Just format, set to “JUST”.
3:2 PULLDOWN
Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) or
COMPONENT input signal.(“SIGNAL [VIDEO]” or “SIGNAL [COMPONENT]” menu
is displayed.)
Press to select 3:2 PULLDOWN.
Press to set ON / OFF.
Press to exit from adjust mode.
Note:
When ON, this setting only affects the following signal input:
• NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal.
• 525i(480i) signal input during “COMPONENT” input signal.
When ON, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which
are recorded at 24 frames per second.
If the picture is not stable, turn the setting to OFF.
Press (ACTION) button
3D Y/C FILTER (NTSC)
COLOR SYSTEM
ASPECT AUTO (4:3)
ON
AUTO
NORMAL
3:2 PULLDOWN OFF
SIGNAL [ VIDEO ]
AUTO PAL SECAM M NTSC NTSC
3D Y/C FILTER (NTSC)
COLOR SYSTEM
ASPECT AUTO (4:3)
ON
AUTO
NORMAL
3:2 PULLDOWN OFF
SIGNAL [ VIDEO ]
SIGNAL [ COMPONENT ]
3:2 PULLDOWN OFF
SET UP 1/2
SIGNAL
SCREENSAVER
INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
RGB1
OSD LANGUAGE ENGLISH ( US )
POWER SAVE OFF
STANDBY SAVE ON
POWER MANAGEMENT OFF
SET UP 1/2
SIGNAL
SCREENSAVER
INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
RGB1
OSD LANGUAGE ENGLISH ( US )
POWER SAVE OFF
STANDBY SAVE ON
POWER MANAGEMENT OFF
R