JVC GD-V422U - Manual (Page 35)

35
Select SIGNAL from the “SET UP” menu during RGB input signal.
Press to select each item.
SYNC
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT
signal).
H & V: The H and V sync signals are input from the HD / VD connector.
ON G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
CS: Uses a synchronized signal of Composite Sync input.
Displays the H (Horizontal) / V (Vertical) frequencies.
This display is valid only for RGB input and PC input signals.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
H-FREQ. (kHz) / V-FREQ. (Hz)
SET UP for Input Signals
Press to exit from adjust mode.
Press (ACTION) button
SIGNAL [ RGB ]
SYNC
H-FREQ. kHz
V-FREQ. Hz
H & V
31.5
60.0
SYNC H & V
SYNC CS
SYNC ON G
H-FREQ. kHz
V-FREQ. Hz 31.5
60.0
R
SET UP 1/2
SIGNAL
SCREENSAVER
INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
RGB1
OSD LANGUAGE ENGLISH ( US )
POWER SAVE OFF
STANDBY SAVE ON
POWER MANAGEMENT OFF