JVC GD-V422U - Manual (Page 71)

31
Cinema reality
Setup for Input Signals
Colour system / Aspect Auto
Select Signal from the “Setup” menu during AV(S Video) input signal. (“Signal
[AV]” menu is displayed.)
Press to select the “Colour System” or
“Aspect Auto”.
Press to select each functions.
If the picture image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur, set
the system to match the format of the input signal.
Press (ACTION) button
Mode
Colour system
Aspect Auto
(4:3)
Function
Set the colour system to match that of the input signal.
If set to “Auto”, the colour system is automatically selected from “PAL”, “SECAM” and “NTSC”,
but not from “M-NTSC”. To view M-NTSC format pictures, you must manually set to “M-NTSC”.
Set to “4 : 3” to view 4:3 images in an unchanged format when Aspect Auto is selected.
If you would like to view 4:3 images in Just format, set to “Just”.
3D Y/C Filter (NTSC)
Colour system
Cinema reality On
Auto
Off
Aspect Auto (4:3) 4 : 3
Signal [ AV ]
Auto PAL SECAM M.NTSC NTSC
Setup 1/2
Signal
Screensaver
Input label
Component/RGB-in select
RGB
RGB1
OSD Language English (UK)
Power save Off
Standby save On
Power management Off
Select “Signal” from the “Setup” menu during AV(S Video) or Component
input signal.(“Signal [AV]” or “Signal [Component]” menu is displayed.)
Press to select Cinema reality.
Press to set On / Off.
Press to exit from adjust mode.
Press (ACTION) button
When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are
recorded at 24 frames per second.
If the picture is not stable, turn the setting to off.
Note:
When On, this setting only affects the following signal input:
• NTSC / PAL signal input during “AV(S Video)” input signal.
• 525i(480i) 625i(575i) signal input during “Component” input signal.
3D Y/C Filter (NTSC)
Colour system
Cinema reality On
Auto
Off
Aspect Auto (4:3) 4 : 3
Signal [ AV ]
Signal [ Component ]
Cinema reality Off
Setup 1/2
Signal
Screensaver
Input label
Component/RGB-in select
RGB
RGB1
OSD Language English (UK)
Power save Off
Standby save On
Power management Off
R