JVC CA-WMD90R - Manual (Page 27)

– 22 –
English
If you try to program a 33rd step
“CD FULL” will appear in the main display.
If your entry is ignored
You have tried to program a track from an empty tray, or a track
number that does not exist on the CD (for example, selecting track
14 on a CD that only has 12 tracks). Such entries are ignored.
Playing at Random — Random Play
The tracks of all loaded CDs will play at random.
1
Load CDs.
• If the current playing source is not the CD player,
press # / 8 on the CD player (or CD 6 on the
remote control), then
7 on the CD player (or 7 on the
remote control) before going to the next step.
2
Press PLAY MODE repeatedly until “CD
RANDOM” appears in the main display.
• Each time you press the button, play mode changes
as follows:
3
Press
# / 8 on the CD player (or CD 6 on the
remote control).
The tracks are played at random.
Random play stops when all the tracks are played once.
To skip the playing track, rotate the right jog dial
clockwise or press
¢ ¡ on the remote control.
• You cannot go back to the previous tracks by rotating the
right jog dial counterclockwise or pressing
4 1 on
the remote control.
To stop during play, press 7 on the CD player.
• Random play also stops when you open a disc tray.
To exit from Random play mode, press PLAY MODE
once or twice, before or after play, so that the unit enters
another playback mode (Continuous play or Program play
mode).
CD PROGRAM
Canceled
(Continuous play)
CD RANDOM
Repeating Tracks or CDs — Repeat Play
You can have all the CDs, the program or the individual
track currently playing repeat as many times as you like.
To repeat play, press REPEAT during or before playing.
Each time you press the button, Repeat play mode changes,
and the REPEAT indicator changes to light as follows:
REPEAT CD ALL: Repeats all the tracks on all the CDs
(continuously or at random), or all the
tracks in the program.
REPEAT 1CD*: Repeats all the tracks on one CD.
REPEAT 1: Repeats one track on one CD.
* REPEAT 1CD is not used for Program play and Random play.
To cancel Repeat play, press REPEAT repeatedly until no
REPEAT indicator lights on the display.
• REPEAT 1CD is also canceled when you press PLAY
MODE to change the play mode.
Prohibiting Disc Ejection — Disc Lock
You can prohibit CD and MD ejection from the unit and
can lock discs.
On the unit ONLY:
To prohibit disc ejection, press
0 for the CD 1 tray while
holding
7 for the CD player with the unit set in standby
mode.
“LOCKED” appears for a while, and the loaded discs (both
CDs and MDs) are locked.
If you try to eject the locked discs
“LOCKED” appears to inform you that the Disc Lock is in use.
To cancel the prohibition and unlock the discs, press
0
for the CD 1 tray while holding
7 for the CD player with
the unit set in standby mode.
“UNLOCKED” appears for a while, and the loaded discs
(both CDs and MDs) are unlocked.
REPEAT CD ALL REPEAT 1CD
REPEAT 1 Canceled
(Continuous play)
EN10-22.CA-WMD90R[E]/f 99.4.1, 6:00 PM 22