JVC CA-WMD90R User Manual

Page 47

Advertising
background image

– 42 –

English

Ex.: When you want to erase track 4

6

Rotate the right jog dial to select the track you want
to move.

7

Press SET.

• If you have selected a wrong track number, press

CANCEL, then select the correct track number again.

8

Rotate the right jog dial to select the position where
you want to move the track.

9

Press SET.

• If you have selected wrong tracks, press CANCEL,

then select the correct tracks by repeating from step
6.

10

Press ENTER (START) to finish the editing
procedure.

11

Press

0 for MD deck B to eject the MD.

“WRITING” appears while the editing you have
made is being recorded on the MD.

ERASE Function

This function allows you to erase an unwanted track.
• To stop any time during editing process, press MD EDIT.

On the unit ONLY:

1

Insert an MD you want to edit into the MD B
loading slot.

Ex.: When you want to move track 5

Ex.: When you want to move to the track 3 position

2

Press one of the MD number buttons (MD 1, MD 2,
and MD 3) corresponding to the MD you want to
edit.
MD deck B starts playing the MD.

3

Press MD EDIT.
MD deck B enters editing mode (with DIVIDE
function selected).

4

Rotate the right jog dial until “ERASE ?” appears.

5

Press SET.

6

Rotate the right jog dial to select the track you want
to erase.

7

Press SET.

• If you have selected a wrong track number, press

CANCEL, then select the correct track number.

8

Press ENTER (START) to finish the editing
procedure.

9

Press

0 for MD deck B to eject the MD.

“WRITING” appears while the editing you have made
is being recorded on the MD.

Continued

EN38-48.CA-WMD90R[E]/f

99.4.1, 6:01 PM

42

Advertising