JVC CA-WMD90R - Manual (Page 41)

– 36 –
English
To stop recording:
When recording from CD player: Press 7 either for CD
player or MD deck B.
When recording from MD deck A: Press
7 either for MD
deck A or MD deck B.
To remove the CD, press
0 for the corresponding CD
number.
• If you eject any CD during editing, editing is canceled.
• If you eject any CD during recording, recording stops.
To remove the MD from MD deck A, press
0 for MD
deck A.
• If you eject the MD during editing, editing is canceled.
• If you eject the MD during recording, recording stops.
To remove the MD from MD deck B, press
0 for MD
deck B.
• If you press the button while recording, the disc loading
slot cover does not open.
To confirm the recording contents
Press DISPLAY/CHARA while recording.
The following information will appear on the display for a
while.
• Track No. of the source CD or MD
• Track No. of the current recording on the MD
Triple Recording
You can record three CDs onto three MDs.
• Before you start recording in the following steps, you
can —
– cancel the setting, press REC MODE.
– go back to the previous steps, press CANCEL.
On the unit ONLY:
1
Prepare CDs.
• Always place a CD on the CD 1 tray. If not, this
function does not work.
• If you want to record two CDs onto two MDs, use the
CD 1 and 2 trays.
2
Insert blank or recordable MDs into the MD B
loading slots.
• Always place an MD on the MD 1 loading slot. If
not, this function does not work.
• If you want to record two CDs onto two MDs, use the
MD 1 and 2 loading slots.
3
Press REC MODE.
“MD
3 MD REC?” appears in the main display.
The MD
3 MD lamp also lights.
4
Rotate the left jog dial until “TRIPLE REC?”
appears in the main display.
The TRIPLE REC and CD
3 MD lamps light.
5
Press START (ENTER).
Recording starts, and the tracks of CD 1 are recorded
onto MD 1, CD 2 onto MD 2, and CD 3 onto MD 3. (If
CD 2 or MD 2 is missing, recording stops when MD 1
is recorded.)
To stop recording, press
7 either for CD player or MD
deck B.
To remove the CD, press
0 for the corresponding CD
number.
• If you eject the CD currently playing, recording stops.
To remove the MD, press
0 for MD deck B.
• If you press the button while recording, the loading slot
cover does not open.
To confirm the recording contents
Press DISPLAY/CHARA while recording.
The following information will appear on the display for a
while.
• Track No. of the source CD
• Track No. of the current recording on the MD
Continued
EN23-37.CA-WMD90R[E]/f 99.4.1, 6:01 PM 36