JVC RX-554RBK - Manual (Page 12)

7
English
Connecting Other Components
You can connect the following components to the receiver using cables with RCA pin
plugs.
Audio Components Video Components*
• Turntable • VCR
• CD player • Video disc player
• Cassette deck
Audio component connections
Getting Started
* You cannot connect the video
input/output from the video
components to this receiver.
Note:
Any turntables incorporating a
small-output cartridge such as an
MC (moving-coil type) must be
connected to the receiver through
a commercial head amplifier or
step-up transformer. Direct
connection may result in
unsufficient volume.
CAUTION:
If you connect a sound-enhancing
device such as a graphic equalizer
between the source components
and this receiver, the sound output
through this receiver may be
distorted.
VCR
VCR
OUT
(REC)
IN
(PLAY)
TAPE PHONO CD
OUT
(REC)
IN
(PLAY)
VHS
LEFT
RIGHT
VIDEO
Video disc player
Video component connections
To audio output
To audio input
To audio output
From video input
To another video components (such
as TV or VCR)
To another video
components (such as
TV)
From video
output
From video
output
If a ground cable is provided
for your turntable, connect the
cable to the GND terminal of
the AM LOOP terminals on the
rear panel.
Turntable
Cassette deck
If your audio components have a COMPU LINK-3 terminals
The COMPU LINK remote control system allows you to control other JVC audio
components from the receiver or vice versa.
For detailed information about the COMPU LINK-3 remote control system, see page
37.
To audio input
To audio output
To audio output
To audio output
CD player
TAPE PHONO CD
OUT
(REC)
IN
(PLAY)
VCR
OUT
(REC)
IN
(PLAY)
L
R
VIDEO
RIGHT
LEFT
AM
LOOP
ANTENNA
AM
EXT
GND
FM 75
COAXIAL
RX-554RBK(EE)_0118-001A_En01-23 98.1.30, 2:19 PM 7