JVC RX-554RBK User Manual
Page 37
32
English
Ex.
Note:
When one of the surround modes
is selected, the corresponding
indicator lights up on the display.
ADJUST
Continued to the next page.
Preparing for Surround Modes
Once you have set the surround modes, you can use the same adjustment every time you
want to activate the surrround mode you want. The receiver memorizes surround
adjustments for each mode.
On the front panel:
1. Press SURROUND so that the Control
%
%
%
%
% / fi
fi
fi
fi
fi buttons
work for selecting the surround modes.
The lamp above the button lights up.
2. Press Control
%
%
%
%
% / fi
fi
fi
fi
fi to select one of the surround
mode (“PROLOGIC”, “3CHLOGIC” or
“THEATER”).
Each time you press the button, the surround modes
change as follows:
PROLOGIC
Select this mode when you use a center speaker and rear
speakers.
THEATER
Select this mode to watch a video source with Dolby Surround
when you have connected the rear speakers (and a center
speaker). This mode gives you the feeling of a movie theater.
3CHLOGIC
Select this mode when you use a center speaker without rear
speakers.
OFF
Select this to turn off the surround/DAP/3D-PHONIC modes.
* You cannot select the 3D-PHONIC modes or the DAP modes in this step.
For the 3D-PHONIC modes: see pages 27 and 28.
For the DAP modes: see pages 29 and 30.
3. Press ADJUST so that the Control
%
%
%
%
% / fi
fi
fi
fi
fi / @
@
@
@
@ / #
#
#
#
#
buttons work for adjusting the selected surround
mode.
The lamp above the button lights up.
4. Press Control
%
%
%
%
% / fi
fi
fi
fi
fi until “CNT MODE” (Center
Mode) appears on the display.
PROLOGIC
THEATER
PAVILION
*
3CHLOGIC
3DACTION
*
OFF
SURROUND
Note:
If you have already set the center
speaker size following the
procedure described on page 13,
you do not have to select the
center mode in this procedure.
RX-554RBK(EE)_0118-001A_En24-42
98.1.30, 2:25 PM
32