JVC RX-554RBK - Manual (Page 27)

22
English
When an emergency broadcast (ALARM signal) is sent from an FM station:
The receiver automatically tunes in the station except in the following cases:
• When you are listening to non-RDS stations (all AM — MW/LW and some FM
stations).
• When the receiver is in standby mode.
While receiving an emergency broadcast, “ALARM” appears on the display.
The TEST signal is used for equipment test — whether it can receive the ALARM
signal correctly.
The TEST signal makes the receiver work in the same way as the ALARM signal does.
If an TEST signal is received, the receiver automatically switches to the station
broadcasting the TEST signal.
While receiving an test signal, “TEST” appears on the display.
Switching to a Broadcast Program of Your Choice Temporarily
Another convenient RDS service is called “EON (Enhanced Other Network).”
The EON indicator lights up while receiving a station with the EON code.
This allows the receiver to switch temporarily to a broadcast program of your choice
(NEWS, TA, and/or INFO) from a different station except in the following cases:
• When you are listening to a non-RDS stations (all AM — MW/LW and some FM
stations).
• When the last received FM station is a non-RDS station.
• When the receiver is in standby mode.
On the front panel only:
1. Press EON so that the last selected program type
appears on the display.
The receiver enters EON standby mode*.
2. Press TA/NEWS/INFO until the program type you
want appears on the display.
Each time you press the button, the display changes to
show the following.
TA: Traffic Announcement in your area.
NEWS: News.
INFO: Program the purpose of which is to impart advice in the widest
sense.
Continued to the next page.
EON
TA
NEWS/INFO TA/INFO
NEWS
TA/NEWS/INFO
INFO TA/NEWS
TA/ NEWS /INFO
Note:
* When the receiver is in EON
standby mode, the receiver is
ready to receive the EON data
(TA/NEWS/INFO) you select.
RX-554RBK(EE)_0118-001A_En01-23 98.1.30, 2:20 PM 22