JVC PD-35DX EN - Manual (Page 14)

Connections
12
PD-42/35DX(ASIA) / LCT1373-001A / English
ENGLISH
Connecting the aerial and VCR
• Aerial cable is not supplied. Use a good quality 75-ohm
coaxial cable.
• Read the manual that came with the VCR before
connecting.
If not connecting a VCR (see fig.A):
Connect an aerial cable to the aerial socket on this
receiver.
If connecting a VCR (see fig.B):
1 Connect the aerial cable to the aerial input
socket on the VCR, and connect the VCR and
receiver with another aerial cable
2 Connect the VCR’s VIDEO OUT (video output)
terminal and the receiver’s VIDEO terminal with
a video cable
To connect a VCR to the receiver with an S-VIDEO
cable:
Connect the VCR’s S-VIDEO OUT (S-VIDEO output)
terminal and receiver’s “S” terminal with an S-VIDEO
cable A, instead of connecting with a video cable.
Note that the connection with a video cable will be
ignored in case you connect a VCR to the receiver with
both video cable and S-VIDEO cable.
3 Connect the VCR’s VIDEO OUT (audio L/R
output) terminals and the receiver’s AUDIO
terminals (L/MONO and R) with an audio cable
• If the VCR’s audio output is in mono, connect the
VCR’s AUDIO OUT (audio output) terminal and the
receiver’s AUDIO L/MONO terminal with an audio
cable.
• To connect additional external devices, please see
“Connecting the external devices” on page 38.
R
A
VIDEO-1
VIDEO-2
VIDEO-3
R
R
O IN AUDIO
COMPONENT
R
L R
L
AUDIO
VIDEO-1
VIDEO-2
VIDEO-3
VIDEO S-VIDEO
R
L/MONO R
Pr R-AUDIO-L P
A
1
1
2 3
Fig.A
Back of the receiver
Fig.B
Back of the receiver
PD-42&35DX_Eng.book Page 12 Tuesday, January 28, 2003 5:39 PM