JVC PD-35DX EN - Manual (Page 35)

33
FEATURES
ENGLISH
PD-42/35DX(ASIA) / LCT1373-001A / English
3 Press the Number buttons to enter the ID
number
The lock is temporarily released so you can view the TV
channel.
If you have forgotten the ID number:
Perform step 1 of “To set the CHANNEL GUARD
function”. After confirming the ID number, press the
b button to exit the menu.
• Even if you reset the lock temporarily, it does not
mean that the CHANNEL GUARD function set for
the TV channel is cancelled. The next time anyone
attempts to view the TV channel, it will be locked
again.
• When you would like to cancel the CHANNEL
GUARD function, you must perform the operation
“To set the CHANNEL GUARD function” again.
• To disable easy choosing of a Programme number
(PR) in which a locked TV channel has been
registered, the Programme number (PR) has been set
that it cannot be chosen by the 6 buttons or the
operation buttons at the TV.
• To disable easy resetting of the lock, “ID NO.” (ID
NO. input screen) is set so that it cannot appear unless
you press the h (Information) button.
SNOW NOISE
When burn-in is minimal, burn-in and residual images may
be softened with the SNOW NOISE function.
1 Choose SNOW NOISE
2 Press the a a a a button
Snow appears on the screen. Leave the TV in this
condition for a few hours.
3 After a few hours, press the TV, number
buttons, or # # # # button
Press the A button for the TV.
The SNOW NOISE function has no effect if used only for a
short time.
PD-42&35DX_Eng.book Page 33 Tuesday, January 28, 2003 5:39 PM