Warning m159705, Emission control system certification label, Emission compliance period – John Deere Tractor 100 Series OMG X23532 J0 User Manual

Page 6: Certification, Safety, Operating safely

Advertising
background image

Safety - 5

SAFETY

• Shield eyes, explosive gases can cause blindness or injury.

• No sparks, flames, smoking.

• Sulfuric acid can cause blindness or severe burns.

• Flush eyes immediately with water. Get medical help fast.

• Keep out of reach of children.

• Do not tip.

• Keep vent caps tight and level.

Warning M159705

M159705

Picture Note: This label is required and installed on machines sold
in California. This label may also be installed on machines sold in
other locations.

Operation of This Equipment May Create Sparks that Can Start Fires
Around Dry Vegetation. A Spark Arrestor May be Required. The Operator
Should Contact Local Fire Agencies For Laws or Regulations Relating to
Fire Prevention Requirements.

Emission Control System Certification Label

NOTE: Tampering with emission controls and components by
unauthorized personnel may result in severe fines or penalties.
Emission controls and components can only be adjusted by EPA
and/or CARB authorized service centers. Contact your John Deere
Commercial and Consumer Equipment Retailer concerning emission
controls and component questions.

The presence of an emissions label signifies that the engine has been
certified with the United States Environmental Protection Agency (EPA)
and/or California Air Resources Board (CARB).

The emissions warranty applies only to those engines marketed by John
Deere that have been certified by the EPA and/or CARB; and used in the
United States and Canada in off-road mobile equipment.

Emission Compliance Period

If your engine has the emission compliance category listed on the
emission control system certification or air index label, this indicates the
number of operating hours for which the engine has been certified to meet
EPA and/or CARB emission requirements. The following table provides
the engine compliance period in hours associated with the category found
on the certification label.

Certification

Your mower has been certified for compliance with American National
Standards Institute B-71.1-2003, “Safety Specifications” for Power Lawn
Mowers, Lawn and Garden Tractors, and Lawn Tractors.

Canadian Electromagnetic Compatibility (EMC)
Compliance

This spark ignition system complies with Canadian ICES-002.

Safety

Operating Safely

This cutting machine is capable of amputating hands and
feet and throwing objects. Failure to observe the following
safety instructions could result in serious injury or death.

• Read, understand and follow all instructions on the

machine and in manuals provided, and view safety video, before starting.
Be thoroughly familiar with the controls and the proper use of the machine
before starting.

• Do not put hands or feet near rotating parts or under the machine. Keep
clear of the discharge opening at all times.

• Only allow responsible adults, who are familiar with the instructions, to
operate this machine. Local regulations may restrict the age of the
operator.

• Clear the area of objects such as rocks, wire and toys which could be
thrown by the blades.

• Be sure the area is clear of bystanders before operating. Stop machine if
anyone enters the area.

• Never carry passengers.

• Do not mow in reverse unless absolutely necessary. Always look down
and behind before and while backing.

• Never direct discharged material toward anyone. Avoid discharging
material against a wall or obstruction. Material may ricochet back toward
the operator. Stop the blades when crossing gravel surfaces.

• Do not operate the machine without the entire grasscatcher, discharge
guard, or other safety devices in place and working. Never operate with
the discharge deflector raised, removed, or altered, unless using a
grasscatcher.

• Slow down before turning.

• Never leave a running machine unattended. Always turn off blades, lock
park brake, stop engine and remove key before dismounting.

• Disengage blades when not mowing. Shut off engine and wait for all
parts to come to a complete stop before cleaning the machine, removing
the grasscatcher, or unclogging the discharge chute.

• Operate machine only in daylight or good artificial light.

• Do not operate the machine while under the influence of alcohol or
drugs.

• Watch for traffic when operating near or crossing roadways. Stop blades
before crossing roads or sidewalks.

Agency

Category

Hours

EPA

C

250

EPA

B

500

EPA

A

1000

CARB

Moderate

125

CARB

Intermediate

250

CARB

Extended

500

Agency

Category

Hours

Advertising
This manual is related to the following products: