Led light, Snapshot (record still image on tape), Motor drive mode – JVC GR-D771U User Manual

Page 34

Advertising
background image

MasterPage: Heading0_Left

34

EN

FEATURES FOR RECORDING

LED Light can be used to
brighten the subject in the dark
place during video recording or
D.S.C. shooting.

1

Press LIGHT repeatedly to change the

setting.

2

Press the Recording Start/Stop Button to

start video recording or SNAPSHOT to shoot a
still image.
NOTES:

Be careful not to point the LED Light directly to
eyes.

If the light does not reach the subject when the
LED Light setting is “ON”, the Night-Alive
function will be activated, and makes it possible
to shoot the subject brighter.

Since subjects are shot at a reduced shutter
speed when the LED Light setting is “ON”, they
will appear slightly blurred.

This feature lets you record still images that
look like photographs onto a tape.

1

Set the VIDEO/MEMORY Switch to

“VIDEO”.

2

Set the Power Switch to “REC”.

3

Set the recording mode to “

M”. (੬ pg. 20)

4

Set “REC SELECT” to

/

” or

.

(

੬ pg. 31)

5

Press SNAPSHOT.

The

“PHOTO

” indication appears and a still image

will be recorded for approx. 5 seconds, then the
camcorder re-enters the Record-Standby mode.

You can perform Snapshot also during
recording. A still image will be recorded for
approx. 5 seconds, then the normal recording
resumes.

Snapshot is effective when the recording mode
selection is set to both

A

or

M

”.

If the image taken by snapshot is too dark or too
bright, select

(

pg. 36) or “SPOTLIGHT”

(

pg. 38).

The image size for snapshot in 16:9 mode is
640 x 360. However, the approximate number of
storable images is similar with snapshot in 4:3
mode. (

pg. 24)

Motor Drive Mode

Keeping SNAPSHOT pressed in step

5

provides an effect similar to serial
photography. (Interval between still
images: approx. 1 second)

The Motor Drive mode is disabled when “REC
SELECT” is set to “

/

” or “

“.

(

pg. 31)

LED Light

The light is on always. (

appears.)

The light turns on automatically
when dark. (

appears.)

Turns off the light.

LED Light

LIGHT

Snapshot (Record Still Image On
Tape)

GR-D771US_EN.book Page 34 Friday, December 15, 2006 9:08 AM

Advertising