Manual focus, Exposure control – JVC GR-D771U User Manual

Page 35

Advertising
background image

EN

35

FEATURES FOR RECORDING

MasterPage: Start_Right

ADV

ANCED FEA

TURES

The camcorder’s Full Range AF system offers
continuous shooting ability from close-up (as
close as approx. 5 cm (2") to the subject) to
infinity.
However, correct focus may not be obtained
depending on the shooting condition. In this
case, use the manual focus mode.

1

Set the Power Switch to “REC”.

2

Set the recording mode to “

M

”.

(

੬ pg. 20)

3

Press FOCUS. The manual focus indicator

appears.

4

Press

1

or

2

to focus on a subject.

●

When the focus level cannot be adjusted any
further or closer, “

” or “

” will blink.

5

Press SET. Focus adjustment is complete.

To reset to Auto Focus
Press FOCUS twice.

Manual focus is recommended in
situations listed below.

●

When two subjects overlap in the same scene.

●

When illumination is low.*

●

When the subject has no contrast (difference in
brightness and darkness), such as a flat, one-
color wall, or a clear, blue sky.*

●

When a dark object is barely visible in the LCD
monitor or the viewfinder.*

●

When the scene contains minute patterns or
identical patterns that are regularly repeated.

●

When the scene is affected by sunbeams or
light reflecting off the surface of a body of water.

●

When shooting a scene with a high-contrast
background.

* The following low-contrast warnings appear

blinking: , ,

and .

Manual exposure control is recommended in
the following situations:

●

When shooting using reverse lighting or when
the background is too bright.

●

When shooting on a reflective natural
background such as at the beach or when
skiing.

●

When the background is overly dark or the
subject is bright.

1

Open the LCD monitor fully.

2

Set the Power Switch to “REC”.

3

Set the recording mode to “

M

”.

(

੬ pg. 20)

4

Press MENU.

5

Select “FUNCTION”, press SET or

2

.

6

Select “EXPOSURE”, press SET or

2

.

7

Select the appropriate exposure, press SET

or

2

.

●

To brighten the image, press 3. To darken the
image, press 4. (maximum +/-6)

8

Press MENU.

NOTES:

●

If the adjustment does not cause any visible
change in brightness, set “GAIN UP” to “AUTO”.
(

੬

pg. 29, 31)

●

You cannot use the manual exposure control at
the same time when “PROGRAM AE” is set to
“SPOTLIGHT” or “SNOW” (

੬

pg. 38), or with

the backlight compensation.

Manual Focus

Manual focus indicator

2

2

2

2

1

1

1

1

SET

FOCUS

Exposure Control

EXPOSURE

±

0

1

Select

2

SET

GR-D771US_EN.book Page 35 Friday, December 15, 2006 9:08 AM

Advertising