JVC GR-D771U - Manual (Page 39)

MasterPage: Advan_Heading0_Right
ADV
ANCED FEA
TURES
EN
39
SHUTTER
OFF: Disables the function. (Factory-preset)
SHUTTER 1/60: The shutter speed is
fixed at 1/60th of a second. Black bands that
usually appear when shooting a TV screen
become narrower.
SHUTTER 1/100: The shutter speed is
fixed at 1/100th of a second. The flickering that
occurs when shooting under a fluorescent light
or mercury-vapour lamp is reduced.
SHUTTER 1/500/SHUTTER 1/4000*:
(Refer to PROGRAM AE - SPORTS
mode.)
* Not available for still image recording.
Still images can be dubbed from a tape to a
memory card.
1
Load a cassette. ( ੬ pg. 16)
2
Load a memory card. ( ੬ pg. 17)
3
Set the VIDEO/MEMORY Switch to
“VIDEO”.
4
Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
5
Set “[T] ➝ [M] COPY” to “ON” . ( ੬ pg. 33)
6
Press 6 to start playback.
7
At the point you want to dub, press 6
again to engage Still Playback.
8
To dub the image, press SNAPSHOT.
● The “ ” indication appears during dubbing.
Dubbing Still Images Recorded On
A Tape To A Memory Card
To use this camcorder as a player
1
Following the illustration, ੬ pg. 23,
“Connections To A TV Or VCR” , connect the
camcorder and the VCR’s input connectors.
2
Perform steps 1 - 6 ( ੬ pg. 23)
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
4
To stop dubbing, stop recording on the
VCR, then stop playback on the camcorder.
NOTES:
●
It is recommended to use the AC Adapter as
the power supply instead of the battery
pack. (
੬ pg. 13)
● To choose whether or not the following displays
appear on the connected TV
• Date/time
Set “DATE/TIME” to “ON” or “OFF”
(
੬ pg. 33).
• Time code
Set “TIME CODE” to “OFF” or “ON”
(
੬ pg. 33).
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV” (
੬
pg. 33).
Dubbing To A VCR
FEATURES FOR RECORING EDITING
GR-D771US_EN.book Page 39 Friday, December 15, 2006 9:08 AM