JVC BR-HD50E - Manual (Page 24)

E-20
ON-SCREEN DISPLAY
On-screen display
Besides E-E images and playback images, the monitor connected to the VIDEO OUTPUT terminals
(VIDEO LINE OUT, Y/C OUT, COMPONENT OUT and HDMI OUT) provides the following on-screen
information.
On-screen display Description Operation
Status display Displays the setting status of the VCR
operation mode, date/time, counter. Settings can be performed with DIS-
PLAY in the DISPLAY Menu screen.
ON : Always display. According to
each event or error, the event
and alarm displays are
shown for about 3 seconds.
AUTO: It displays for about 4 sec-
onds during mode changes.
OFF : No on-screen display. The
alarm display is shown
according to errors, which
occurred.
Event display Displays the operating status of blank
search, index recording/search.
Alarm display Displays error/alarm messages for
incorrect operation or improper condi-
tion of BR-HD50.
Warning display When an error occurred with the VCR,
it displays warnings with the relevant
error codes. (XPage 80) It is displayed automatically when an
error with the VCR occurred.
Menu display Displays the menu setting screen.
(XPage 64) When BR-HD50 enters the STOP/
STILL mode or no cassette tape is
loaded, the menu is displayed when
the MENU button is pressed.
Multi Cue-up screen Displays the Multi Cue-up screen for
registering or selecting cue-up
(searching) point. (XPage 56)
When BR-HD50 enters the STOP,
STILL or PLAY mode, press the Cue-
up button to display the Multi Cue-up
screen.
VIDEO OUTPUT
Monitor