JVC BR-HD50E - Manual (Page 66)

E-62
TIME CODE
Playing back the time code
BR-HD50 is also equipped with a time code reader. During playback, the time code or user’s bit data
recorded on the tape is displayed on the monitor or the counter display.
1.
Select the time code data to display.
Set the COUNTER switch to “TC” or “UB”.
2.
Press the PLAY button to go to the PLAYBACK mode.
It displays the time code and the user’s bit on the monitor or
the counter display. The counter display mode becomes TCR
or UBR.
Caution on time code playback
z During playback, if a portion of tape without recorded time
code runs through, the time code stops running. Playback con-
tinues.
z If tapes without recorded user’s bit, e.g. those recorded with a
home-use DV VCR, are played back on BR-HD50, “– –” is dis-
played.
COUNTER switch
3 D V 2 K C H – 1 / 2 S M I N P 6 0
W A R N I N G 7 0 0 1
D R UM MO T O R F A I L U R E
R E C I N H I B I T
0 6 / 1 0 / 0 5 P L A Y
1 1 : 2 0 : 0 0 T C R 0 2 : 0 0 : 0 0 : 0 0
Monitor (Status display)
Time code or user’s bit