Jura Capresso X95 User Manual
Page 13
13
13. Programming
Before leaving our factory, the machine is adjusted to enable you
to obtain coffee without any additional programming. In order to
adapt the result to your personal taste, various settings can be pro-
grammed individually. The programming keys are located behind
the front cover (3).
The following settings can be programmed:
̈ Powder quantity
̈ Coffee temperature
̈ Water quantity
̈ Steam portion
̈ Tea portion
̈ Filter
̈ Water hardness
̈ Economy mode
̈ Timer clock
̈ Automatic switch on time
̈ Automatic switch off time
̈ Supplies and cup counter
̈ Language selection
13.1 Programming powder quantity
Ⅲ Switch the machine on by pressing ON/OFF key
.
Ⅲ Press key
until you can hear an acoustic signal.
Ⅲ
POWDER QUANTITY / SELECT KEY
Ⅲ Now press the key that you want to programme. Use the key for
1 cup only. The corresponding quantity for 2 cups is adjusted
automatically by the machine after programming is finished.
Ⅲ
POWDER
·········· II ··········
Ⅲ The powder quantity can be selected by pressing keys
or
briefly.
-
+
+
-
P
Ⅲ To store the new powder quantity in memory briefly press key .
Ⅲ
POWDER QUANTITY / SELECT KEY.
Ⅲ By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
13.2 Programming coffee temperature
Ⅲ
TEMPERATURE COFFEE / SELECT KEY
Ⅲ Now press the key that you want to programme.
Ⅲ Select the required temperature (high or normal) by activating
key or .
Ⅲ To store the new coffee temperature in memory briefly press key
.
Ⅲ
TEMPERATURE COFFEE / SELECT KEY
Ⅲ By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
13.3 Programming water quantity
Ⅲ
WATER QUANTITY / SELECT KEY
Ⅲ Put a cup under the coffee-spout (15) and then press the key that
you want to programme.
Ⅲ
The selected value is confirmed
Ⅲ Now your machine prepares a coffee.
Ⅲ
ENOUGH COFFEE? / PRESS KEY
Ⅲ
OK?
·········· II ··········
Ⅲ When the required water quantity is reached press key . You
can call up the next setting by pressing key
.
Ⅲ There is an additional possibility to alter the water quantity
anew. Press key
or
for this purpose.
Ⅲ If you wish to draw another coffee to control the water quantity,
press key again otherwise press key
briefly to store water
quantity in memory.
P
-
+
+
P
+
-
P
P
N
+
P
-
+
N
+
P
E