Jura Capresso X95 User Manual

Page 14

Advertising
background image

14

Ⅲ By pressing the

button, you can select the next phase, or

press the

button in order to leave the programming.

13.4 Programming steam portion

STEAM PORTION

Ⅲ Press key .

PORTION /....20 SEC.

Ⅲ By pressing key

or

you can programme time in seconds

(drawing off time of 3 – 250 sec.)

Ⅲ Press key .

STEAM PORTION

Ⅲ By pressing the

button, you can select the next phase, or

press the

button in order to leave the programming.

13.5 Programming tea portion

Ⅲ Place a cup under the height-adjustable tea-spout (22).
Ⅲ Press key .

OPEN TAP

ENOUGH TEA? / CLOSE TAP

TEA PORTION

Ⅲ The required portion of tea-water is programmed now.
Ⅲ By pressing the

button, you can select the next phase, or

press the

button in order to leave the programming.

13.6 Programming Filter

Please read chapter 7.1 “Placing filter“.

N

+

P

N

+

P

-

+

P

N

+

13.7 Programming water hardness

(only with setting Filter no)

HARDNESS LEVEL 3

Ⅲ Press key
Ⅲ By pressing key

or

briefly you can programme the water

hardness level.

Ⅲ Then press key

briefly to store the water hardness level in

memory.

Ⅲ By pressing the

button, you can select the next phase, or

press the

button in order to leave the programming.

To determine the water hardness level please read chapter 6.
“Adjusting for water hardness“.

13.8 Programming economy mode

ECONOMY MODE OFF

Ⅲ Press key
Ⅲ By briefly pressing key

or

you can programme the mode

you would like.

Ⅲ Then press key

briefly to store mode in memory

Ⅲ By pressing the

button, you can select the next phase, or

press the

button in order to leave the programming.

You can programme your machine to “economy mode“. In the set-
ting ECONOMY MODE ON the steam heating-system is switched
off. The heating for the cup warming tray is switched off too. If
you want to draw off steam you need to press the steam key

,

warning lamps flash and your machine heats up.

After 10 minutes the steam heating-system switches off
automatically. The warning lamps go out. By pressing the
steam key anew, you return to stand-by-status for drawing
off steam.

N

+

P

-

+

P

N

+

P

-

+

P

Advertising
This manual is related to the following products:

X90