Jura Capresso X95 - Manual (Page 22)

22
Problem Cause Action
Not enough froth while – Frothing nozzle blocked – Clean frothing nozzle
frothing up milk – Clean Auto-Cappuccino – Clean Profi Auto-Cappuccino/Caffè Latte
– as described in chapter 11.2
If the above mentioned problems and/or messages still persist, please contact your dealer or get in touch directly with Jura Elektroapparate
AG.
21. Legal information
These operating instructions contain all the information necessary
for the correct use, operation and maintenance of your espresso/
coffee machine.
Understanding and complying with the directions contained in
these operating instructions are essential to ensure that the machine
is utilised without risk and to ensure safety during operation and
maintenance.
These operating instructions cannot cover all the possible ways in
which this machine may be used.
We would like to further point out that the contents of these operat-
ing instructions in no way constitute a part of, or alter, any pre-
vious or existing contract, agreement or legal relationship. All ob-
ligations on the part of Jura Elektroapparate AG result solely from
the relevant sales agreement which also contains full details of
the only warranty terms valid in respect of this machine. The con-
tractual terms of this warranty are neither extended nor limited in
any form by the information in these operating instructions.
These operating instructions contain information that is protected
by copyright. The photocopying or translation into any other
language of these instructions without prior written authorisation
from Jura Elektroapparate AG is strictly prohibited.
22. Technical specifications
Impressa X90/X95
Voltage:
230 V AC
Output: 1350 W
Fuse: 10 A
Safety check:
Energy consumption standby:
approx. 4,4 Wh
Energy consumption ready to
make coffee:
approx. 31 Wh, Economy Mode on
approx. 41 Wh, Economy Mode off
Pump pressure: max. 15 bar
Capacity, bean container: 280 gr.
Cable length: approx. 1,1 m
Water tank: 5,7 litres
Capacity, grounds container: max. 40 port.
Weight: 15 kg
Dimensions (B x H x D): 41 x 47 x 39 cm
The machine complies with the following EU directives:
73/23/EWG dated 19/02/1973 “Low Voltage Directive” including
Modification Directive 93/336/EWG
89/336/EWG dated 03/05/1989 “EMC Directive” including
Modification Directive 92/31/EWG