John Lewis JLWM 1410 - Manual (Page 11)

Door lock light (11)
The light Door lock shows if you can open
the door:
• light on: the door cannot be opened. The
machine in working or has stopped with
water left in the tub.
• light off: the door can be opened. The
programme is finished or the water has
been emptied out.
Delay Start (12)
The programme can be delayed from 30 min
- 60 min - 90 min, 2 hours and then by 1
hour up to a maximum of 20 hours by
means of this button.
Display (4)
4.1 4.2 4.3 4.4 4.5 4.6
4.7
4.8
4.9 4.10
4.1 Temperature indicator: «Cold»
corresponds to cold washing.
4.2 Spin speed indicator - «Rinse
hold» and «Quiet» options
The Spin Exclusion is indicated by
a «0». This option eliminates all the
spin phases and increases the number
of rinses.
Rinse hold : when you choose this
function, the machine will not drain the
water of the last rinse, so as not to crease
the laundry. The selected option will be
displayed.
Quiet : when you choose this function, the
machine will not drain the water of the last
rinse, so as not to crease the laundry. As all
spinning phases are cancelled, this washing
cycle is very quiet and it can be selected at
night or in times with a more economical
power rate. On some programmes the
rinses will be performed with more water.
If the «Rinse Hold» or «Quiet»
option has been selected the «Door
lock» light is on, the «Start/Pause»
button light goes out and the display
shows a flashing «0». The door
cannot be opened because the water
must be drained. To empty out water
read the paragraph «At the end of
the programme».
4.3 Available options: Easy iron,
Intensive, Stain and Prewash . When an
option is enabled the rectangle around that
option illuminates.
11