John Lewis JLWM 1410 - Manual (Page 28)

9. Put the cap back on the emergency
emptying hose and place the latter back
in its seat.
10. Replace the filter into the pump by
inserting it correctly into the special
guides. Screw the pump cover firmly by
turning it clockwise.
11. Close the pump door.
Warning!
When the appliance is in use and depending
on the programme selected there can be
hot water in the pump.
Never remove the pump cover during a
wash cycle, always wait until the appliance
has finished the cycle, and is empty. When
refitting the pump cover, ensure it is
securely re-tightened so as to stop leaks and
young children being able to remove it.
Cleaning the water inlet
filters
Warning! If the appliance doesn't fill
or it is taking longer to fill with water,
check if the water inlet filters are
blocked.
1. Turn off the water tap.
2. Unscrew the water inlet hose.
3. Clean the filter using a hard bristle
brush.
4. Screw the hose back onto the tap.
5. Unscrew the hose from the machine.
Keep a rug nearby because some water
may flow.
28