Jabra Pro 9450 - Manual (Page 20)

20
EN
G
LI
SH
JABRA PRO 9450
5.3 HEADSET LED INDICATOR
The multi-colored LED indicator is located on the arm of the headset, and indicates headset status. For a
complete list of headset LED indicator samples, please refer to the Technical Specifications section (p. 33) of this
manual.
5.4 HEADSET AUDIO INDICATORS
The headset plays a variety of audio tones to indicate events. For a complete list of playable audio indicator
samples, please refer to the Technical Specifications section (p. 34) of this manual.
Critical Headset Audio Indicators
Low battery warning
If the headset battery is low, two very quick low tones will repeat occasionally to indicate the headset battery
should be charged immediately. Dock the headset to charge the headset battery.
Out of range warning
If the headset moves out of range of the base, three quick descending tones will repeat every fifteen seconds,
until the headset is moved back into range of the base.
5.5 BASE KEYPAD
The Jabra PRO 9450 base keypad displays information about the headset and call status, and has controls for call
handling. From here, you can change target phone, answer an incoming call, end the current call, configure base
settings, or open an audio link to the current target phone.
8
7
5
4
3
1 2
6
1 Battery icon: indicates the current battery level.
2 Headset docking icon: indicates the headset is docked.
3 Audio link icon: indicates audio link between base and headset is
active.
4 Mute icon: indicates the headset microphone is muted.
5 Mute button: mutes/un-mutes the headset microphone.
6 Group call icon: indicates desk phone and softphone calls are
merged.
7 Phone state icon: indicates desk phone or softphone call states.
8 Phone buttons: used for desk phone and/or softphone call
handling.