Jabra Pro 9450 - Manual (Page 21)

21
EN
G
LI
SH
JABRA PRO 9450
5.6 BASE KEYPAD VISUAL INDICATORS
Icon Event Icon Event
Battery charging Current target phone
Full battery Phone ringing
Low battery Phone on call
Very low battery Phone on hold
Headset docked Phone unplugged
Unknown headset docked Group call
Headset and base pairing
Audio link between headset
and base is active
Muted Unable to connect to headset
5.7 BASE AUDIO INDICATORS
The base speaker is located on the bottom of the base, and plays two distinct sounds.
Incoming Call Ringtone
Adjust the incoming call ringtone volume using the Jabra Control Center.
1. Launch Jabra Control Center, and select either ´Desk phone´ or ´Softphone´ tab.
2. Adjust the ´Base speaker ring tone level´ slider to the desired setting, and click ´Apply´.
Keypad Button Clicks
Tapping, double-tapping or pressing the keypad buttons will play a click sound. Adjust keypad button volume
via the Jabra Control Center. The default setting is ´off´.
1. Launch Jabra Control Center, and select either ´Desk phone´ or ´Softphone´ tab.
2. Select one of four preset keypad click settings (off, low, medium, or high), and click ´Apply´.