Jura Capresso F70 - Manual (Page 22)

22
Ⅲ
READY
CLEAN
Ⅲ Touch the symbol (7).
Ⅲ
EMPTY
TRAY
Ⅲ Empty the tray (20).
Ⅲ
NO
TRAY
Ⅲ Insert the tray (20) again.
Ⅲ Remove the drip grate (19).
Ⅲ Put a container (1 l, Fig. 11) under the adjustable coffee spout
(17).
Ⅲ
PRESS
MAINT.
Ⅲ Touch the symbol (7).
Ⅲ
CLEANING
Ⅲ FILL
TABLET
Ⅲ Fill in the tablet (see Fig. 14)
Ⅲ
PRESS
MAINT.
Ⅲ Touch the symbol (7).
Ⅲ
CLEANING
Ⅲ EMPTY
TRAY
Ⅲ
NO
TRAY
Ⅲ
READY
Ⅲ Wipe coffee powder tank with a dry cloth after the cleaning
program has finished.
Ⅲ The cleaning operation was completed successfully.
17.1 Cleaning without display request
Ⅲ Press the Rotary Switch (1) until
FILTER – /
ߛ appears.
Ⅲ Turn the Rotary Switch (1) until
MAINTENANCE appears.
Ⅲ Press the Rotary Switch (1) to confirm.
Ⅲ
RINSE
Ⅲ Turn the Rotary Switch (1) until
CLEAN appears.
Ⅲ Press the Rotary Switch (1) again to confirm.
Ⅲ
EMPTY TRAY
Ⅲ The program “Clean” is now active. Now proceed as described
in Chapter 17 from EMPTY TRAY onwards.
18. De-scaling
Your IMPRESSA features an integrated de-scaling program. The
cleaning operation will take some 40 min.
JURA de-scaling tablets which are specially designed for the
de-scaling program of your IMPRESSA are available at your
authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate de-scaling agents.
If the IMPRESSA needs de-scaling, the corresponding mes-
sage is displayed.
You can still draw off coffee or hot water/steam and start the
de-scaling program later.
Before starting the de-scaling program, the machine must be
switched off. Once started, the de-scaling operation must not
be interrupted.