Access main menu screen, Access vhs mode set screen, Select s-vhs et mode – JVC SR-VS10U User Manual
Page 39: Return to normal screen, Super vhs et, S-vhs et
EN
39
Super VHS ET
(VHS deck only)
Your VCR is equipped with Super VHS ET that makes it possible
to record with S-VHS picture quality on VHS cassettes.
NOTES:
●
You cannot activate the S-VHS ET function...
...while recording is in progress.
...while timer-recording (incl. Instant Timer Recording
੬
pg. 49) is in progress.
...while Video Calibration (
੬
pg. 34) is in progress.
...when the VCR's power is off.
●
S-VHS ET does not work with S-VHS tapes.
S-VHS ET
This facility allows recording with S-VHS picture quality on
VHS cassettes. You can play back those cassettes recorded
in S-VHS ET on a VCR equipped with S-VHS ET.
NOTES:
●
To obtain the highest quality recording and playback
pictures over a longer period on this model, S-VHS
recording on S-VHS tape is recommended.
●
You can play back S-VHS ET recordings not only on this
VCR but also on another VHS VCR equipped with S-VHS
ET.
* It is recommended to specifically label S-VHS ET
recordings so you can easily distinguish them from
regular VHS recordings.
●
S-VHS ET recordings can also be played back on an S-
VHS VCR or a VHS VCR equipped with SQPB (S-VHS
QUASI PLAYBACK) function. However, there may be
cases where S-VHS ET playback is not possible on a
particular VCR.
●
Frequent still, frame-by-frame and slow-motion playback
may damage the tape and cause picture degradation.
●
With some tapes, better picture quality may not be
obtained even with S-VHS ET recording. It is recom-
mended that you do test record beforehand to make sure
whether better results can be obtained.
●
High Grade tapes are recommended for superior results.
●
Make sure that "VIDEO CALIBRATION" is set to "ON" at
the Function screen (
੬
pg. 34).
●
During S-VHS ET playback, noise may appear depending
on tape quality.
●
Noise may appear during still, frame-by-frame and slow-
motion playback.
●
If the playback picture becomes blurred or interrupted,
use a cleaning cassette.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS VHS MODE SET
SCREEN
2
Move the highlight bar (arrow) to "VHS MODE SET" by
pressing CH
5∞ or%fi, then press OK or
#
.
SELECT S-VHS ET MODE
3
Move the highlight bar
(arrow) to "S-VHS ET" by
pressing CH
5∞ or%fi,
then press OK or
#
to set to
"ON" or "OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
VHS MODE SET
= S-VHS ET
ON
S-VHS MODE
ON
VIDEO CALIBRATION
ON
PICTURE CONTROL
AUTO
DIGITAL TBC/NR
ON
VIDEO STABILIZER
OFF
NEXT PAGE
SELECT WITH (
5,∞) AND (OK)
PRESS (MENU) TO END