Start dubbing, End audio dubbing – JVC SR-VS10U User Manual

Page 61

Advertising
background image

EN

61

NOTES:

●

When monitoring the sound during Audio Dubbing, the
normal soundtrack is automatically selected. If you wish to
hear the Hi-Fi or mixed sound (Hi-Fi + Normal soundtracks),
refer to the "Select The Soundtrack" section (

੬

pg. 29) and

select the soundtrack you wish to hear. (VHS deck only)

●

Audio dubbing stops automatically when the counter reaches
"0:00:00", and the VCR enters the Play mode. Check the
counter reading before dubbing. (VHS deck only)

●

Audio dubbing is also possible using the rear AUDIO IN
connectors.

●

Audio dubbing cannot be performed on a VHS/S-VHS
cassette that has had its record safety tab removed, or on a
Mini DV cassette that has had its erase protection switch set
to "SAVE".

●

When playing back an audio-dubbed tape, refer to the "Select
The Soundtrack" section (

੬

pg. 29) to select the soundtrack

you wish to hear.

●

Picture may be distorted during Audio Dubbing Pause.

●

It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.

●

Audio dubbing is not possible using the DV IN/OUT
connector.

START DUBBING

6

Engage the audio component's Play mode, then press
PLAY to start the tape in your VCR. Audio dubbing
begins at this point.

●

blinks and is displayed on the front display

panel.

● To stop dubbing temporarily, press PAUSE. Press

PLAY to resume dubbing.

END AUDIO DUBBING

7

Press STOP to stop the tape in your VCR, and engage
the audio component's Stop mode.

1

2

3

4

5

6

7

8

9

0

2

4

1

3

T

W

DV

VHS

PLAY

PLAY

PAUSE

PAUSE

STOP

STOP

Advertising