JL Audio SB-N-PTHFNDR2/10W3v3/BK - Manual (Page 5)

SB-N-PTHFNDR2/10W3v3_INSTR_SKU#011234 SB-N-PTHFNDR2/10W3v3_INSTR_SKU#011234
C O N G R A T U L A T I O N S
You have completed the installation for this model!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
S T E P 2 8
Replace the cargo area flooring, from STEP 1.
S T E P 2 7
Replace the tailgate’s bottom sill plate, from STEP 2.
S T E P 2 6
To place the supplied mounting assembly onto the socket
cup set screw, you need to reach through the opening of the
removed pocket from STEP 12.
Place the supplied flat washer, lock washer and then hex
nut onto the socket cup set screw. Secure the mounting
assembly.
Replace the removed pocket.
Page 5 • JL Audio, Inc 2007
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU#011234-07-26-200 JLA-SKU#011234-07-26-2007 7 • Printed in USA • ©2005 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902
#6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign
patents pending. For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100 w w w . j l a u d i o . c o m
1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A
I N C L U D E D H A R D W A R E
(2) (2) 3/8-inch -16 x 1-inch Hex Bolt 3/8-inch -16 x 1-inch Hex Bolt (1) (1) 3-inch x 3-inch Wax Square 3-inch x 3-inch Wax Square
(3) (3) 3/8-inch -16 Hex Nut 3/8-inch -16 Hex Nut (1) (1) 3/8-inch -16 x 2-1/4-inch Socket Cup Set Screw 3/8-inch -16 x 2-1/4-inch Socket Cup Set Screw
(3) (3) 3/8-inch Split Lock Washer 3/8-inch Split Lock Washer (1) (1) 16.0-inch x 1.5-inch x 0.25-inch Flat bar 16.0-inch x 1.5-inch x 0.25-inch Flat bar
(5) (5) 3/8-inch Flat Washer 3/8-inch Flat Washer
S P E C I F I C A T I O N S
Enclosure Type: Acoustic Suspension (sealed) Acoustic Suspension (sealed)
Driver Type: 10W3v3-4 10W3v3-4
Nominal Impedance: 4 ohms mono 4 ohms mono
Continuous Power Handling: 300 Watts 300 Watts
P O W E R R E C O M M E N D A T I O N
JL Audio recommends using a high quality amplifier such as the JL Audio 250/1v2.
The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the 250/1v2
when being used to power your Stealthbox
® .
The JL Audio 250/1v2 is a very versatile audio component. Please consult the owner’s manual for even more
detailed information about installing and tuning this amplifier.
M I D / H I G H F R E Q U E N C Y D R I V E R F I T M E N T
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location: 6-inch x 9-inch / Front Doors 6-inch x 9-inch / Front Doors
Fits JL Audio Models: TR690-TXi & VR690-CXi TR690-TXi & VR690-CXi
Rear Speaker Size / Location: 6.5-inch / Rear Doors 6.5-inch / Rear Doors
Fits JL Audio Models: TR650-CXi, TR650-CSi, VR650-CXi, VR650-CSi, TR650-CXi, TR650-CSi, VR650-CXi, VR650-CSi,
XR650-CXi, XR650-CSi, C5-650x,C5-650 & ZR650-CSi XR650-CXi, XR650-CSi, C5-650x,C5-650 & ZR650-CSi