JVC HM-DH30000U - Manual (Page 24)

24
EN BASIC PLAYBACK AND RECORDING (cont.)
Automatic operations after
rewinding
— Next Function Memory
The Next Function Memory “tells” the VCR what to do
after rewinding is complete.
● Ensure that the VCR is in stop mode.
a– For Automatic Playback Start
Press REW (
1 ), then press PLAY ( 3 ) within 2
seconds.
b– For Automatic Power Off
Press REW ( 1 ), then press POWER within 2
seconds.
c– For Automatic Timer Standby
Press REW ( 1 ), then press TIMER within 2
seconds.
NOTE:
It is not possible to select the Automatic Timer Standby function
if the cassette’s record safety tab is removed.
Locating beginning of
recordings
— Index Search
Index codes are placed on the tape at the beginning of
each recording when recording on this VCR. You can
find and automatically play back from the beginning of
any recording using the Index Search function.
1
Start search
While the tape is not running, press 4 or ¢ on
the Remote.
2
Access distant code
To access a recording of 2 to 9 index codes away,
press
4 or ¢ repeatedly until the correct
number is displayed on the screen (only if
“SUPERIMPOSE” is set to “ON” ;
੬ pg. 56).
Playback begins automatically when the desired
recording is located.
● If you want to find the very beginning of the
desired program, press REW ( ) or FF ( )
or turn the SHUTTLE ring after playback starts.
NOTE:
An index code is not placed on the tape when recording is
resumed from recording pause.
1 2 3
4 5 6
7 8 9
0
VCR TV CABLE/DBS
H
G
I
FF ( )
Current position
on the tape Beginning of the current
program recorded Beginning of the 2nd next
program recorded
–1 1 2 –2 3
Previous
program
recorded Next
program
recorded
2nd next
4 ¢
G
F
F
– a, b, c
F
– C
F
– b
– a
F
J
SHUTTLE
ring
REW ( )