Editing, Edit from camcorder, Various connection for editing tapes – JVC HM-DH30000U User Manual
Page 62
62
EN
Edit From
Camcorder
To rear panel
REMOTE PAUSE/
AV COMPULINK
connector
Mini-plug cable
(not supplied)
(JVC camcorder
only)
Audio cable
(supplied)
Camcorder
(for playback)
To Audio output
To EDIT
This VCR (for recording)
To AUDIO
Input
EDITING
S-video cable
(supplied)
To S-video
output
Various connection for editing tapes
The following three methods can be used for editing tapes.
●
VHS to S-VHS editing (VIDEO-VIDEO connection):
Although the picture quality is inherently limited by the
original VHS quality, the edited tape has better picture
quality than those made by VHS-to-VHS editing.
●
S-VHS to VHS editing (VIDEO-VIDEO connection):
Since the original source is recorded in S-VHS mode, the
edited tape has better picture quality than those made by
VHS-to-VHS editing.
●
S-VHS to S-VHS editing (S-VIDEO connection): Original
picture quality of S-VHS made can be duplicated with
minimal picture degradation. This is the best editing
method you can use on S-VHS VCRs.
●
DV to D-VHS editing (DV connection): If your camcorder
has a DV connector, D-VHS recording (HS/STD/LS3
mode) is possible with this VCR.
However, this VCR can be used only as a recording VCR.
To S-VIDEO
Input
1
2
3
4
5
6
7
8
9
0
VCR TV CABLE/DBS
4 7
4 – 6
4 – 6
9
3
3
S200
DV IN
i.LINK IN/OUT
DIGITAL OUT
OPTICAL
PCM/DOLBY DIGITAL
R
Y
L
P
B
/C
B
VIDEO
P
R
/C
R
S VIDEO
S VIDEO
AUDIO
R
IN(L-1)
IN
(L-2)
L(MONO) VIDEO
REMOTE PAUSE/
AV COMPU LINK
CABLE BOX
ANTENNA
AUDIO
OUT
OUT
OUT
TV
IN
VHF/UHF
IN
To DV output
This VCR (for recording)
To DV IN
connector
DV cable
(not supplied)
A
B
DV camcorder
(for playback)
8
NOTES:
●
It is impossible to dub from the VCR to a camcorder equipped
with the DV connector because the DV signal is not output
from the DV IN connector on this VCR.
●
You cannot select HS mode for recording speed on this VCR
when connecting to the camcorder equipped with the DV
connector.
●
You cannot use the i.LINK connection depending on the type
of camcorder equipped with the DV connector. In this case,
set "LINC" to "OFF" (
੬
pg.58).